What to do when the IO-LINK RFID is broken?

The damage rate for the IO-LINK RFID

Balluff iolink master station module (Fig.1) can connect lf 125 kHz (BIS VL), HF 13.56 MHz read-write head

图片1

IO-link master station needs to pay attention to wiring problems when connecting RFID read-write head (Fig. 2)

图片2

Pin2 of IO-link port cannot be connected to 24 V, and the output module of IO-link needs to set Pin2 of IO-link port as input. Therefore, when using the IO-link read-write head, try to use the three core wire to prevent the IO-link read-write head damage caused by improper use.

 

图片3

Click on the link to learn more about Balluff RFID