Magnetostrictive sensors with a BUS interface
Balluff has an external displacement sensor of the btl5-h1xx-p series that supports the CANopen interface.
The electrical interface has both S92, and S94, and a measuring range from 50-4000mm. This sensor supports 4 magnetic blocks. 
Balluff has an external displacement sensor of the BTL5-D11x-p series that is supporting a DeviceNet interface.
It works with a S93 electrical interface and has a range of 50-4000mm.
Balluff has built-in displacement sensors of the BTL7-V50E-ABYZ series that supports EtherCAT bus.
The BTL6-V1XE-ABYZ series, and the BTL7 include a power interface, bus in interface and out interface.
The BTL7 range is between 25 and 7620mm, while it supports 16 magnetic blocks.
The BTL6 works with a S115 interface, has a range of 25-4012mm and supports 2 magnetic blocks.
Balluff has a built-in displacement sensor of the BTL7-V50D-ABYZ series that supports the Ethernet/ IP bus, including power interface, bus in interface and out interface. The BTL7 range is between 25-7620mm, and it supports up to 16 magnetic blocks.
Balluff has built-in displacement sensor of the BTL6-U101-ABYZ series that supports an IO link interface, has a communication speed of COM3, an electrical interface S4, and a measuring range 25-4572mm. This sensor supports a dual magnetic block.
Balluff offers built-in displacement sensors of the BTL5-T110-ABYZ series. It supports PROFIBUS, including power interface, bus in interface and out interface. It has a measuring range of 25-4000mm, while supporting 4 magnetic blocks at most.
Balluff also has built-in displacement sensor of the BTL7-V50T-ABYZ series which supports the PROFINET bus, including power interface, bus in interface and out interface. The BTL7 possesses a measuring range between 25-7620mm, and supports up to 16 magnetic blocks.
